Canon imagePRESS 1135 Series Service Manual page 1552

32-3) Loosen the 4 screws of PCB cover with using a stubby driver.
32-8) Close the controller box.
• 2 screws
32-9) Install the CP side cover.
9
Installation > Removable Hard Disk Kit-AA1 > Installation procedure
F-9-282
33) Open the front plate of the RHDD unit.
34) Insert the HDD case unit in the HDD1.
9 Installation > Removable Hard Disk Kit-AA1 > Installation procedure
32-4) Close the controller box.
32-5) Refer to the step 30) and fix the iVDR unit
HDD1 cable and the fan cable with the edge
saddle of RHDD unit.
32-6) Refer to the step 31) and install RHDD
unit.
F-9-284
32-7) Open the controller box and tighten the 4
screws loosened in the step 32-3).
F-9-283
9-135
9-135