Canon imagePRESS 1135 Series Service Manual page 1374

SORTER> ADJUST
GLU-AMT3 Glue amount adj3: trimmer
Lv.1 Details To adjust the glue application amount on the return way at the glue
thick application by changing the space between the paper stack
(thickness 3.5 to 6.4 mm) and the scraper plate.
As the value is changed by 1, the space gets wider/narrower by
0.05 mm (as the space is widened, the glue application amount is
increased).
+: space is widened (application amount increased)
-: space is narrowed (application amount is decreased)
Use case When the glue application amount is not appropriate on the paper
stack
Display/adj/set range -20 to 20
Unit 0.05 mm
Default value 0
GLU-AMT4 Glue amount adj4: trimmer
Lv.1 Details To adjust the glue application amount on the return way at the glue
thick application by changing the space between the paper stack
(thickness 6.5 to 11.4 mm) and the scraper plate.
As the value is changed by 1, the space gets wider/narrower by
0.05 mm (as the space is widened, the glue application amount is
increased).
+: space is widened (application amount increased)
-: space is narrowed (application amount is decreased)
Use case When the glue application amount is not appropriate on the paper
stack
Display/adj/set range -20 to 20
Unit 0.05 mm
Default value 0
GLU-AMT5 Glue amount adj5: trimmer
Lv.1 Details To adjust the glue application amount on the return way at the glue
thick application by changing the space between the paper stack
(thickness 11.5 to 22.4 mm) and the scraper plate.
As the value is changed by 1, the space gets wider/narrower by
0.05 mm (as the space is widened, the glue application amount is
increased).
+: space is widened (application amount increased)
-: space is narrowed (application amount is decreased)
Use case When the glue application amount is not appropriate on the paper
stack
Display/adj/set range -20 to 20
Unit 0.05 mm
Default value 0
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER> ADJUST
GLU-AMT6 Glue amount adj6: trimmer
Lv.1 Details To adjust the glue application amount on the return way at the glue
thick application by changing the space between the paper stack
(thickness 22.5 to 25 mm) and the scraper plate.
As the value is changed by 1, the space gets wider/narrower by
0.05 mm (as the space is widened, the glue application amount is
increased).
+: space is widened (application amount increased)
-: space is narrowed (application amount is decreased)
Use case When the glue application amount is not appropriate on the paper
stack
Display/adj/set range -20 to 20
Unit 0.05 mm
Default value 0
GLU-MOVE Adj of glue vat shift amount: trimmer
Lv.1 Details To adjust the shift amount of glue vat at glue application on the
trimmer.
Display/adj/set range -80 to 80
Default value 0
GLU-TEMP Set of glue temperature control: trimmer
Lv.1 Details [Not used]
To set the control temperature of glue on the trimmer.
Display/adj/set range -145 to 165
Default value 153
GLUAMT1C Coated paper glue amount adj1: trimmer
Lv.1 Details To adjust the glue application amount on the coated paper on the
return way at the glue thick application by changing the space
between the paper stack (thickness 0 to 1.4 mm) and the scraper
plate.
As the value is changed by 1, the space gets wider/narrower by
0.05 mm (as the space is widened, the glue application amount is
increased).
+: space is widened (application amount increased)
-: space is narrowed (application amount is decreased)
Use case When glue peeling occurs with normal glue application amount on
the coated inner sheet
Display/adj/set range -20 to 20
Unit 0.05 mm
Default value 0
8-431
8-431