4) Install the PCI bus expansion PCB to the Riser support plate.
• 2 screws (TP; M3x6)
x2
5) Install the PCI bus expansion PCB to the connector of main controller PCB 1.
• 3 screws (TP; M3x6)
x3
9
Installation > Expansion Bus-F1/F2 > Installation Procedure
F-9-247
9
Installation > Expansion Bus-F1/F2 > Installation Procedure
MEMO:
When installing the IP Sec security board,
install it before the step 6).
6) Install the controller cover.
7) Insert the power plug to the outlet.
8) Turn ON the main power switch.
F-9-248
9-118
9-118