Canon imagePRESS 1135 Series Service Manual page 1218

COPIER > OPTION > NETWORK
STS-PORT ON/OFF of TOTsync status communctn port
Lv.2 Details ON/OFF setting for Inquiry/Response (sync)-mode status
communication port with T.O.T.
Select 1 (ON) in the case of connecting the PC and the host machine
with the cross cable while Service NAVI is used.
Use case When the service NAVI is used.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> NETWORK> CMD-PORT
Supplement/memo T.O.T: TUIF over TCP. Communication protocol to be used for
communication with the built-in application (UI) and the internal
application such as COPY/ SEND/ BOX, etc. (Canon's own protocol).
CMD-PORT ON/OFF TOTasync command communicatn port
Lv.2 Details ON/OFF setting for non-synchronized command communication port
with T.O.T.
Select 1 (ON) in the case of connecting the PC and the host machine
with the cross cable while Service NAVI is used.
Use case When the service NAVI is used.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> NETWORK> STS-PORT
Supplement/memo T.O.T: TUIF over TCP. Communication protocol to be used for
communication with the embedded (built-in) application (UI) and the
internal application such as COPY/ SEND/ BOX, etc. (Canon's own
protocol).
NS-CMD5 Limit CRAM-MD5 auth method at SMTP auth
Lv.2 Details Restricting use of CRAM-MD5 authentication method at the time of
SMTP authentication.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: AMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: the protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > NETWORK
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > NETWORK
COPIER > OPTION > NETWORK
NS-GSAPI Limit GSSAPI auth method at SMTP auth
Lv.2 Details Restricting use of GSSAPI authentication method at the time of
SMTP authentication.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: the protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
NS-NTLM Limit NTLM authentct method at SMTP auth
Lv.2 Details Restricting use of NTLM authentication method at the time of SMTP
authentication.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: the protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
NS-PLNWS Limit plain text auth in SMTP auth encry
Lv.2 Details Under the environment in which the communication packet is
encrypted, restricting use of PLAIN/LOGIN authentication, which is
plain text, at the time of SMTP authentication.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: the protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
8-275
8-275