Canon imagePRESS 1135 Series Service Manual page 1131

COPIER> ADJUST> HV-TR
2TR-SHR6 Adj sec trns paper allotted voltge: set6
Lv.2 Details To adjust the paper allotted voltage of secondary transfer in setting 6.
Setting 6 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV6, TR-PPR6,
TR-DUP6. When this condition is true, paper allotted voltage that is
set here is applied to the secondary transfer inner roller.
As the value is increased by 1, voltage is increased by 100 V.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Caution Increase/decrease the value 1 by 1 and check the symptom each
time.
Display/adj/set range -10 to 10
Unit 100 V
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-ENV6, TR-PPR6, TR-DUP6
2TR-SHR7 Adj sec trns paper allotted voltge: set7
Lv.2 Details To adjust the paper allotted voltage of secondary transfer in setting 7.
Setting 7 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV7, TR-PPR7,
TR-DUP7. When this condition is true, paper allotted voltage that is
set here is applied to the secondary transfer inner roller.
As the value is increased by 1, voltage is increased by 100 V.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Caution Increase/decrease the value 1 by 1 and check the symptom each
time.
Display/adj/set range -10 to 10
Unit 100 V
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-ENV7, TR-PPR7, TR-DUP7
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
COPIER> ADJUST> HV-TR
2TR-SHR8 Adj sec trns paper allotted voltge: set8
Lv.2 Details To adjust the paper allotted voltage of secondary transfer in setting 8.
Setting 8 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV8, TR-PPR8,
TR-DUP8. When this condition is true, paper allotted voltage that is
set here is applied to the secondary transfer inner roller.
As the value is increased by 1, voltage is increased by 100 V.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Caution Increase/decrease the value 1 by 1 and check the symptom each
time.
Display/adj/set range -10 to 10
Unit 100 V
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-ENV8, TR-PPR8, TR-DUP8
TR-PPR1 Set PPtype for PPallotted volt adj: set1
Lv.2 Details To set the paper type (paper weight) for setting 1.
Setting 1 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV1, TR-PPR1,
TR-DUP1. When this condition is true, paper allotted voltage that is
set at 2TR-TGT1 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV1, TR-DUP1, 2TR-TGT1
TR-PPR2 Set PPtype for PPallotted volt adj: set2
Lv.2 Details To set the paper type (paper weight) for setting 2.
Setting 2 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV2, TR-PPR2,
TR-DUP2. When this condition is true, paper allotted voltage that is
set at 2TR-TGT2 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV2, TR-DUP2, 2TR-TGT2
8-188
8-188