Canon imagePRESS 1135 Series Service Manual page 1396

SORTER> OPTION
BUFF-SW2 Setting Finisher buffer operation:Fin-AG
Lv.1 Details To set ON/OFF of buffer operation in the Finisher.
When 1 is set, the alignment condition of the paper delivered from
the lower path may be improved, but productivity decreases.
Use case When misalignment occurs in the buffer paper delivered from the
lower path
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When the buffer operation is set to OFF, productivity decreases.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
1SHT-SRT Setting of 1-sheet Offset&Collate:Fin-AG
Lv.1 Details To set ON/OFF of Offset&Collate for 1-sheet document.
When 1 is set, Offset&Collate for 1-sheet document is enabled, but
the paper is not appropriately stacked.
Use case When preferring to execute 1-sheet Offset&Collate with low stacking
condition
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
SD-LMTLS Set sddl delivery limitless oprtn:Fin-AG
Lv.1 Details To set ON/OFF of the Finisher Saddle Assembly limitless delivery
operation.
When 1 is set, "stack over" does not occur and saddle operation can
be performed continuously, but the stacking condition decreases.
Use case When preferring to perform saddle operation continuously
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When limitless operation is set to ON, the saddle stacking condition
decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > SORTER > OPTION
8 Service Mode > SORTER > OPTION
SORTER> OPTION
SD-STCNB Set sddl delivery stack quantity: Fin-AG
Lv.1 Details To increase the saddle stacking number.
When 1 is set, the "saddle stack over" count is increased, and the
stacking number increases.
Use case When preferring to increase the stacking number of the Saddle
Delivery Assembly
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0:
Common to small/large sizes
17 to 20 sheets booklet: 5 sets
11 to 16 sheets booklet: 10 sets
6 to 10 sheets booklet: 15 sets
1 to 5 sheets booklet: 25 sets
1:
<Small size>
17 to 20 sheets booklet: 20 sets
11 to 16 sheets booklet: 30 sets
6 to 10 sheets booklet: 40 sets
1 to 5 sheets booklet: 50 sets
<Large size>
17 to 20 sheets booklet: 10 sets
11 to 16 sheets booklet: 20 sets
6 to 10 sheets booklet: 30 sets
1 to 5 sheets booklet: 40 sets
Default value 0
BUFF-THK Set buffer oprtn for heavy paper: Fin-AG
Lv.1 Details To set ON/OFF of buffer operation for heavy paper
(181 to 220 g/m2).
When 1 is set, productivity of sort and staple mode of Finisher is
improved, but the stacking condition decreases.
Use case When improving productivity of sort and staple mode for heavy paper
(181 to 220 g/m2)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When improving productivity, the stacking condition may decrease.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode SORTER> OPTION> PRD-PRTY
8-453
8-453