Canon imagePRESS 1135 Series Service Manual page 1112

COPIER> ADJUST> CCD
MTF-S8 MTF value setting 8: sub scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Input the value in the service label of the reader.
Use case When the reader controller PCB is replaced or RAM is cleared.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 85
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-S9 MTF value setting 9: sub scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Input the value in the service label of the reader.
Use case When the reader controller PCB is replaced or RAM is cleared.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 85
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
DFCH-R2 Complex chart No.2 data (R) [Back]
Lv.1 Details To calculate the front/back linearity, set the back Red data of No.2
image in DADF complex chart.
Enter the value of reader's service label.
Use case When the reader controller PCB is replaced or RAM is cleared.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 2550
Default value 2000
Related service mode COPIER> ADJUST> CCD> DFCH-R10, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
COPIER> FUNCTION> CCD> DF-LNR
DFCH-R10 Complex chart No.10 data (R) [Back]
Lv.1 Details To calculate the front/back linearity, set the back Red data of No.10
image in DADF complex chart.
Enter the value of reader's service label.
Use case When the reader controller PCB is replaced or RAM is cleared.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2550
Default value 0
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
COPIER> FUNCTION> CCD> DF-LNR
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > CCD
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > CCD
COPIER> ADJUST> CCD
DFCH-B2 Complex chart No.2 data (B) [Back]
Lv.1 Details To calculate the front/back linearity, set the back Blue data of No.2
image in DADF complex chart.
Enter the value of reader's service label.
Use case When the reader controller PCB is replaced or RAM is cleared.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 2550
Default value 2000
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-R10, DFCH-B10,
DFCH-G2, DFCH-G10
COPIER> FUNCTION> CCD> DF-LNR
DFCH-B10 Complex chart No.10 data (B) [Back]
Lv.1 Details To calculate the front/back linearity, set the back Blue data of No.10
image in DADF complex chart.
Enter the value of reader's service label.
Use case When the reader controller PCB is replaced or RAM is cleared.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2550
Default value 0
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-R10, DFCH-B2,
DFCH-G2, DFCH-G10
COPIER> FUNCTION> CCD> DF-LNR
DFCH-G2 Complex chart No.2 data (G) [Back]
Lv.1 Details To calculate the front/back linearity, set the back Green data of No.2
image in DADF complex chart.
Enter the value of reader's service label.
Use case When the reader controller PCB is replaced or RAM is cleared.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 2550
Default value 2000
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-R10, DFCH-B2,
DFCH-B10, DFCH-G10
COPIER> FUNCTION> CCD> DF-LNR
8-169
8-169