Canon imagePRESS 1135 Series Service Manual page 1133

COPIER> ADJUST> HV-TR
TR-ENV1 Set envirnmnt for PPallot volt adj: set1
Lv.2 Details To set the environment (absolute moisture ratio) for setting 1.
Setting 1 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV1, TR-PPR1,
TR-DUP1. When this condition is true, paper allotted voltage that is
set at 2TR-TGT1 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR1, TR-DUP1, 2TR-TGT1
TR-ENV2 Set envirnmnt for PPallot volt adj: set2
Lv.2 Details To set the environment (absolute moisture ratio) for setting 2.
Setting 2 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV2, TR-PPR2,
TR-DUP2. When this condition is true, paper allotted voltage that is
set at 2TR-TGT2 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR2, TR-DUP2, 2TR-TGT2
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
3
or less
3
3
3
3
3
3
3
or less
3
3
3
3
3
3
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
COPIER> ADJUST> HV-TR
TR-ENV3 Set envirnmnt for PPallot volt adj: set3
Lv.2 Details To set the environment (absolute moisture ratio) for setting 3.
Setting 3 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV3, TR-PPR3,
TR-DUP3. When this condition is true, paper allotted voltage that is
set at 2TR-TGT3 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR3, TR-DUP3, 2TR-TGT3
TR-ENV4 Set envirnmnt for PPallot volt adj: set4
Lv.2 Details To set the environment (absolute moisture ratio) for setting 4.
Setting 4 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV4, TR-PPR4,
TR-DUP4. When this condition is true, paper allotted voltage that is
set at 2TR-TGT4 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to the environment occurs
(mottled image/density loss due to excessive transfer/toner splash
on solid image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 7
0: Absolute moisture ratio 0.63 g/m
1: 0.64 to 1.72 g/m
2: 1.73 to 5.79 g/m
3: 5.8 to 8.89 g/m
4: 8.9 to 14.9 g/m
5: 15 to 17.9 g/m
6: 18 to 21.5 g/m
3
7: 21.6 g/m or more
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-PPR4, TR-DUP4, 2TR-TGT4
8-190
3
or less
3
3
3
3
3
3
3
or less
3
3
3
3
3
3
8-190