Canon imagePRESS 1135 Series Service Manual page 1233

COPIER > OPTION > USER
SLP-SLCT Usage setting of network applications
Lv.2 Details With the setting to use network-related application, recovery is
available through network because this equipment does not move to
sleep mode 3.
For this machine to recover from sleep mode 3 through network,
a particular packet needs to be received, however the existing
network-related application does not send this packet.
With the setting not to use the network-related application, this
machine cannot recover from sleep mode 3 through network (when
this machine gets into sleep mode 3).
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution • Do not use this mode under normal servicing.
• The setting to use this mode is not suitable for saving energy
consumption because the machine does not get into sleep mode 3
(2W power).
Display/adj/set range 0 to 1
0: No use (shift to sleep mode 3 is available)
1: Use (shift to sleep mode 3 is not available)
Default value 0
Supplement/memo Network-related application: NetSpot Accountant, imageWARE
PS-MODE Compatible mode setting at PS usage
Lv.2 Details Setting for compatibility with existing machine regarding image
process or print specification with PR print.
Selecting 1 enables to have the print result equivalent to that of
iR2200/2800/3300 series while selecting 2 enables to have the print
result equivalent to that of iR105 series.
Use case When replacing machine.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 65535
0: No use of compatibility mode with PS
1: Image processing equivalent to that of iR2200/2800/3300 series
(compatibility with existing machine)
2: Image processing equivalent to that of iR105 (compatibility with
existing machine)
3: Spare
4: 2-sided print with landscape and portrait mixed when using Canon-
made controller (compatibility with non-Canon-made controller)
5 to 65535: Spare
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
CNCT-RLZ Setting of connection serialize function
Lv.2 Details Connection serialize is a function to assure job grouping function of
imageWARE Output Manager Select Edition V1.0.
The setting to enable this mode can avoid job rearrangement
because the machine does not receive job data from other
connection until the machine completes job data reception from the
current connection.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo Connection: connection to be established through network between
multiple hosts (PC, etc).
Job grouping function: a function of imageWARE Output Manager
Select Edition V1.0 to prevent job interruption from other PC by
group job (sending multiple jobs in 1 session at job transmission).
JA-FUNC ON/OFF of job archive function
Lv.2 Details ON/OFF setting of job archive function
Caution Changing this mode is not available in Service Mode, but reference
is available (in Service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
JA-JOB Set of job archive target job
Lv.2 Details Setting the type of job subject to job archive.
With the job archive function enabled, archive operation is executed
when executing the target job.
Caution Changing this mode is not available in Service Mode, but reference
is available (in Service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0: None, 3: Limited to FAX/IFAX, 0xFFFFFFFF: All jobs
Default value 0
Related service mode COPIER> OPTION> USER> JA-FUNC
8-290
8-290