Surface-Mounted Devices With Integrated On-Site Operation Panel; Basic Rules For Expansion - Siemens SIPROTEC 5 V7.80 Operation

Expanding Devices

2.2 Surface-Mounted Devices with Integrated On-Site Operation Panel

2.2 Surface-Mounted Devices with Integrated On-Site Operation Panel

Basic Rules for Expansion

2.2.1
NOTE
i
i
Prepare the following tools for the device expansion:
•
Phillips screwdriver size PZ1 and PZ2
•
Screwdriver DIN 4 x 0.8
•
During assembly, use the prescribed torques
Comply with the following basic rules when expanding devices:
•
Always fit the base module on the right in the 1st device row.
•
Always fit the expansion modules from right to left.
•
Always fit the on-site operation panel of the base module on the left.
•
Always fit the on-site operation panels of the expansion modules from left to right.
•
Always fit the on-site operation panel of the expansion module with the key switches in the 1st place
next to the on-site operation panel of the base module.
•
Always fit the on-site operation panels without LEDs last.
•
Join the on-site operation panels to one another with 2 mounting brackets.
•
Always install a power-supply module PS203 on the right as the first unit in the 2nd device row.
•
Note that the PS203 must always have the same rated voltage as the base module.
•
In the 2nd device row, you do not need any on-site operation panels, mounting brackets, or distance
frames.
NOTE
i
i
When expanding a device in the 1st device row, order 2 mounting brackets that match the width of the
expanded device.
24 SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018