Subaru SVX 1992 Manual page 520

3- 2 [W4B4] AUTOMATIC TRANSMISSION AND DIFFERENTIAL
(2) Install the control valve by engaging the manual
valve and manual lever, then tighten the 19 bolts .
Tightening torque :
7 - 9 N " m (0.7 - 0 .9 kg-m, 5 .1 - 6 .5 ft-Ib)
B3-227
Fig. 213
a . Be careful not to pinch the harness roll the gasket.
b. Tighten the control valve mounting bolts evenly .
4) Install the oil strainer to the control valve. Be careful
not to cut or break the O-ring . Then tighten bolts .
Tightening torque :
7 - 9 N " m (0 .7 - 0 .9 kg-m, 5 .1 - 6 .5 ft-Ib)
_" -
Oil strainer
® a'~ U
G
.
B3-347
Fig . 214
5) Secure five connectors .
--+o--+
For Duty sol . A
For Sol . 2 (shift)
] ~ For " Sol. 1 (shift)
Grounding
" Sol . 3 (shift)
a
O
J
For Duty sol . B o
=~
®
J
~ l For ATF temp .
sensor
B3-273
Fig. 215
6) Install the oil cooler outlet pipe, and secure with two
bolts .
Tightening torque :
7 - 9 Nom (0 .7 - 0.9 kg-m, 5.1 - 6.5 ft-Ib)
Fit the pipe into position . Be careful to avoid twisting .
7) Install the oil pan .
(1) Attach the magnet at the specified position .
r-1g . z 16
146
Short bolt (Yellow) 11 pcs
Long bolt (Blackf 8 pcs