Subaru SVX 1992 Manual page 558

AUTOMATIC TRANSMISSION AND DIFFERENTIAL
[T5D4] 3-2
1 . MEASURE SIGNAL VOLTAGE OUTPUT EMIT-
TED FROM TCU .
1) Raise vehicle and support with safety stands .
On 4-wheel drive models, raise all wheels off ground .
2) Warm up the engine and transmission .
3) Move selector lever to "D ."
4) Measure signal voltage output emitted from TCU
while idling the engine .
Connector Fr terminal / Specified voltage :
(B68) No. 13 - No. 10 / 10 - 14 V
2. CHECK HARNESS BETWEEN TCU AND SHIFT
SOLENOID 2.
1) Disconnect connector from TCU .
2) Disconnect connector from transmission .
3) Measure resistance between TCU connector and
transmission connector, and between TCU connector
and body .
Connector & terminal / Specified resistance :
(B68) No. 13- (B14) No . 2 / 0 i2
(B68) No. 13 - Body / 1 Mfg min .
(1368) No. 10- (1314) No. 4 / 0 i1
(1368) No. 10- Body / 1 Mfg min .
3.CHECK SHIFT SOLENOID 2'S GROUNDING
LINE.
1) Disconnect connector from transmission .
2) Measure resistance between transmission connec-
tor receptacle and transmission case .
Connector £r terminal / Specified resistance:
(T2) No . 4 - Transmission / 0 0
4. Check shift solenoid 2.
1) Disconnect connector from transmission .
2) Measure resistance between transmission connec-
tor receptacle's terminals .
Connector & terminal / Specked resistance:
(T2) No . 2 - No . 4 / 20 - 30 0
185