Subaru SVX 1992 Manual page 186

ENGINE
[W4A21 2-3
2. CYLINDER HEAD
C2-263
Fig. 83
1) Remove oil level gauge guide.
2) Remove heater pipe.
3) Remove cylinder head bolts in numerical sequence
shown in Figure .
Leave bolts 5@ or ® engaged by three or four threads
to prevent cylinder head from falling .
4) While tapping cylinder head with a plastic hammer,
separate it from cylinder block. Remove bolts 6@ or
to remove cylinder head.
5) Remove cylinder head gasket .
6) Similarly, remove right-hand cylinder head .
Fig . 84
47