Table of Contents
Advertisement
STEERING SYSTEM
(w6CO) 4-3
1) Place pump bracket (with pump installed) in a vise
using soft jaws .
Do not place pump itself in a vise.
2) Valve removal
Remove oil pump switch, and disconnect connectors
and remove valve ASSY and spring .
Fig. 151
3) Rear body removal
(1) Loosen bolts securing rear body so that they can
be rotated by hand.
Fig. 152
(2) Remove pump from pump bracket .
(3) Remove pump bracket from vise.
(4) Place pump in a vise.
Use soft jaws .
(5) Remove bolts which have already been loosened
in step (1) above .
Fig . 153
(6) Remove gasket.
4) Removal of cartridge ASSY, pressure plate and pin
Remove cartridge'ASSY, pressure plate and pin from
front body as a unit. (Cartridge ASSY consists of a rotor,
ten vanes and a cam .)
Be careful not to scratch cartridge ASSY.
5) Remove two types of O-rings by hand .
Fig. 154
6) Disassembly of front body
(1) Pry off retaining ring from inner perimeter groove
of front body at pulley location.
I
. B4-10071
Fig. 155
63
Advertisement
Table of Contents
Troubleshooting
