Subaru SVX 1992 Manual page 810

4-3 [T3B1] STEERING SYSTEM
1 . BASIC INSPECTION
1) Check battery voltage .
2) Check fuses No. 8, 15 (in F/13) and 25 (in M/13).
2. READ MEMORY
1) Turn ignition switch "OFF ."
2) Connect male terminal to diagnosis connector
mode terminal No . 6.
3) Start engine .
4) Disconnect male terminal from diagnosis connec-
tor mode terminal No . 6 .
3. D CHECK
1) Turn ignition switch "OFF ."
2) Connect male terminal to diagnosis connector
mode terminal No . 5.
3) Start engine .
4) Drive vehicle at least 10 meters (33 ft) .
5) Disconnect male terminal from diagnosis connec-
tor mode terminal No. 5 .
4. CLEAR MEMORY
1) Turn ignition switch "OFF ."
2) Connect male terminals to diagnosis connector
mode terminals No. 5 and 6 .
3) Start engine .
4) Disconnect male terminals from diagnosis con-
nector mode terminals No . 5 and 6 .
5) Ensure that memory is cleared in read memory
mode .
80