Table of Contents
Advertisement
SUSPENSION
[W6A1] 4-1
1) Lift up vehicle and remove front wheels .
10) Remove steering universal joint. (Refer to 4-3
2) Move front hood damper stay to another hole posi-
[W2B0] .)
tion .
Place alignment mark before removing.
Fig. 43
hag . 44
3) Remove OZ sensor connector .
4) Remove power steering connector.
5) Remove throttle cover .
6) Remove air intake duct.
7) Attach lifting wire to engine .
rig. 45
8) Carefully lift engine .
Be sure to lift engine just enough to unload sub frame.
9) Remove front exhaust pipe .
I
C4-034
Fig. 46
11) Remove tie rod end from housing .
rig. 4 /
21
Advertisement
Table of Contents
Troubleshooting
