Subaru SVX 1992 Manual page 639

AWD SYSTEM [W3BO] 3-4
Do not lower the rear differential excessively, or the
rear drive shaft boot may be damaged.
18) Remove the bolts which secure the rear differential
member to rear sub frame .
Fig. 86
14) Support the rear differential with transmission jack .
Fig. 89
19) Remove the rear differential member .
Fig. 87
15) Remove the two bolts which secure the bracket and
rear differential to rear differential member .
Fig. 90
B: INSTALLATION
To install, reverse the removal sequence .
1) Install the rear differential member .
When installing the rear differential member, pay at-
tention not to confuse the installation sequence of the
upper and lower stoppers .
Fig. 88
16) Remove the self locking nuts which connect the
rear differential to the rear sub frame .
17) While slowly lowering transmission jack, move the
rear differential forward and remove bolts from the rear
sub frame.
Do not tilt the rear differential, or the rear differential
gear oil will spill out.
33