SUSPENSION
[W1 1A01 4-1
f1g. 99
Ng . 7 UU
14) Remove sub frame bracket .
Get help to remove sub frame bracket.
rig. i v i
15) Remove sub frame .
Be careful not to damage ABS harness and parking
brake wire.
16) Place alignment mark on adjustment bolt and sub
frame .
17) Remove lateral links.
a. For installation and tightening torque of rear differ-
ential, refer to 3-4 [W2A0] .
b. For installation and tightening torque of brake
parts, refer to 4-4 [W2A1] .
c. When tightening trailing and lateral links, make sure
vehicle weight is on suspension.
d. When replacing rear subframe with new one, cut
hanger using saw and apply Knock Thrust Paint (7703)
to prevent rust formation .
F-1y.
37
12) Remove ABS sensor harness from sub frame .
13) Place transmission jack under sub frame.