Subaru SVX 1992 Manual page 119

2-11 [w3AO) ENGINE AND TRANSMISSION MOUNTING SYSTEM
11) Remove exhaust system
(4) Remove stabilizer clump from sub-frame.
(1) Remove under cover.
(5) Remove stabilizer CP .
(2) Remove 02 harness from clip .
14) Remove nuts which install cushion rubber onto
(3) Remove front exhaust pipes . sub-frame .
(4) After removing EGR pipe, remove right exhaust
manifold .
(5) Remove left exhaust manifold .
Refer to C.2-9.
12) Remove bolts which install power steering fluid
cooling hose onto body .
rig. s/
13) Remove stabilizer ASSY .
(1) Remove right side brake hose and ABS harness
from strut.
(2) Remove stabilizer link .
(3) After marking with paint between stabilizer lever
and stabilizer CP, separate stabilizer lever from stabi-
lizer CP .
Stabilizer lever
K
Marking ,
Lower arm
C4-109
~ ~11L1111~~® ;~~I
Sub-frame
ill)
(~ - ~/ ~ a11
` ~ c'-e Y
t
C2-105
Fig . 39
15) Raise up engine while cushion rubbers separate
from sub-frame surely .
16) Remove bolts which install cushion rubber bracket
onto engine block.
J
~o I,
Front cushion rubber
C2-113
Fig. 40
Fig. 38
16