Subaru SVX 1992 Manual page 875

BRAKES
2. LEVER STROKE ADJUSTMENT
D: PARKING BRAKE ADJUSTMENT
1) Remove console box lid.
1 . SHOE CLEARANCE ADJUSTMENT
1) Remove adjusting hole cover from back plate . ~'
conwlebox
2) Turn adjusting screw using a slot-type screw driver
until brake shoe is in close contact with disc rotor .
3) Turn back (downward) adjusting screw 3 or 4
Lid
notches .
(,over (rubber)-
Slot-type screw driver
ng screw
Back plate
Fig . 88
4) Install adjusting hole cover to back plate.
[W3D2] 4-4
04-141 I
Fig. 89
2) Forcibly pull parking brake lever 3 to 5 times .
3) Adjust parking brake lever by turning adjuster until
parking brake lever stroke is set at 6 to 7 notches with
operating force of 196 N (20 kg, 44 lb) .
4) Tighten lock nut .
`\\ ~' Lock nut
Adjuster nut /
04-142
Fig . 90
5) Install console box lid .
Lever stroke :
6 to 7 notches when pulled
with a force of 196 N (20 kg, 44 lb)
Torque (Adjuster lock nut) :
4.4 - 7.4 Nom (0.45 - 0.75 kg-m, 3.3 - 5.4 ft-Ib)
45