Subaru SVX 1992 Manual page 502

3- 2 Iw4A31 AUTOMATIC TRANSMISSION AND DIFFERENTIAL
. .V . . __
I,& . ...
5) Place two wooden blocks on the workbench, and
8) Disconnect the harness connectors for the solenoids
stand the transmission case with its rear end facing
and duty solenoids and the ground cord.
d
own.
a. Be careful not to scratch the rear mating surface of
the transmission case.
b. Note that the parking rod and drive pinion protrude
from the matina surface.
_~ -,~---+
For Duty sol . A
For Sol. 2 (shift)
7
For * Sol. 1 (shift)
Grounding O
;
e Sol. 3 (shift)
? I o
f
For Duty sol . B
I1'
For ATF temp.
~`1
sensor
B3-273
Be careful not to damage O-ring on oil strainer.
10) Remove the control valve body.
128
6) Remove the oil pan and gasket .
Tan the corners of the oil nan when rramnvinn
Fig . 139
91 Remove the oil strainer .
,y .
7) Remove the oil cooler outlet pipe .
Be careful not to twist the pipe.