Subaru SVX 1992 Manual page 698

4-2 [W1B0) WHEELS AND AXLES
I B: DISASSEMBLY
1) Using HUB STAND (28099PA080), support housing
and hub ASSY securely .
2) Attach HUB REMOVER "FRONT" (28099PA040) to
housing and drive hub COMPL out .
C4-326
Fig. 22
Fig. 23
If inner bearing race remains in the hub, remove it with
a suitable tool (commercially available).
a . Be careful not to scratch polished area of hub .
b. Be sure to install inner race on the side of outer race
from which it was removed.
Fig . 24
3) Remove disc cover from housing .
Fig . 25
4) Using a standard screwdriver, remove outer and
inner oil seals.
Do not use old oil seals.
5) Using pliers, remove snap ring .
Fig. 26
6) Using HOUSING STAND "FRONT" (28099PA010),
support housing securely .
7) Using BEARING INSTALLER "FRONT" (28099PA00U),
press inner race to drive out outer bearing .
a. Do not remove outer race unless it is faulty .
b . Discard outer race after removal .
14