Subaru SVX 1992 Manual page 545

3-2 [T380] AUTOMATIC TRANSMISSION AND DIFFERENTIAL
B: ABNORMAL DISPLAY ON POWER INDICATOR
When any self-diagnostic item is malfunctioning, the
display on the power indicator blinks immediately after
the engine starts.
The malfunctioning part or unit can be determined by a
trouble code during self-diagnosis operation . Problems
which occurred previously can also be identified
through the memory function .
If the power indicator does not show a problem (al-
though a problem is occurring), the problem can be
determined by checking the performance characteris-
tics of each sensor using the select monitor.
Indicator signal is as follows :
"
- 0 .25
ON
(a) Not OK
OFF i 2.0
0.25
8 .0
ON ,-,
(b) O
I
I K
OFF
i 2.0
ON '
Ignition
key
OFF
53-415
Fig. 280
Warning can be noticed only when the ignition switch
is initially turned to ON.
172