Subaru SVX 1992 Manual page 772

4-3 (w3134]
STEERING SYSTEM
> 6 ~
-at
-
98 N (10 kg, 22 Ib)
3
04-245
Fig. 78
In axial direction
Service limit :
0.27 mm (0.0106 in) or less
Fig. 79
4. TURNING RESISTANCE OF GEARBOX
Service limit:
Straight-ahead position within 30 mm (1 .18 in)
from rack center
Less than 11 .18 N (1.14 kg, 2.51 lb)
Maximum allowable resistance
15.79 N (1.61 kg, 3.55 lb) or less
Difference between left and right sliding resistance :
Less than 20%
04-247
Fig . 80
E : ASSEMBLY
Use only SUBARU genuine grease for gearbox.
Specified grease for gearbox
VALIANT GREASE M2
[Parts No . 003608001, net 0 .5 kg (1 .1 Ib)]
1) Reassembly of rack ASSY
(1) Attach steering body ASSY to STAND as shown .
Apply a coat of grease to needle bearing .
a. Use a special tool to support steering body ASSY .
b. If steering body ASSY is removed from vehicle, be
sure to remove rust and clean.
c. Ensure that needle bearing is free from defects . If it
is faulty, replace steering body ASSY with a new one .
fig . 81
(2) Using INSTALLERs B and C, attach oil seal to
INSTALLER A. Insert INSTALLER A into rack ASSY
from gear side . Remove oil seal from INSTALLER A
when it approaches piston and remove INSTALLERs
from rack ASSY.
42