Table of Contents
Advertisement
3-4 [W2GO]
AWD SYSTEM
Be sure to wipe off red lead completely upon com-
pletion of adjustment .
(3) After completing the above adjustment, install oil
seal in side bearing retainer.
a. Use DRIFT (398437700) to press the oil seal into
position.
b. Apply chassis grease between the oil seal lips .
(4) Install rear cover.
Torque (Rear cover bolt) :
19 - 25 N+m (1 .9 - 2.6 kg-m, 14 - 19 ft-Ib)
F
G- INSTALLATION
To install, reverse the removal sequence .
1) Install the rear differential ASSY to body.
2) Insert the DOJ of rear drive shaft into the rear
differential .
For installation of the DOJ, refer to "3-4 AWD
SYSTEM" [W2A2] .
3) Install other parts in the reverse order of removal.
4) After installation fill differential carrier with gear oil to
the upper plug level .
Apply fluid packing to plug .
Fluid packing :
Three-bound 1205 or equivalent
Oil capacity :
0.8 C (0.8 US qt, 0.7 Imp qt)
30
Advertisement
Table of Contents
Troubleshooting
