3-2 [T6AOI
AUTOMATIC TRANSMISSION AND DIFFERENTIAL
6. Troubleshooting Chart with
Select Monitor
A: BASIC TROUBLESHOOTING CHART
If no trouble codes appear in the self diagnosis function
(although problems have occurred or are occurring),
measure performance characteristics of sensors, actu-
ators, etc ., in the "F' mode (select-monitor function),
and compare with the "basic data" to determine the
cause of problems .
Trouble occurs
No trouble codes appear in self-diagnosis operation .
I Check each item in select mode function.
I
Compare measured values with basic data .
Determine item which is outside basic data specifications .
I Check sensor and actuator affected .
I
202