Subaru SVX 1992 Manual page 138

2-2 [08130) ON-CAR SERVICES
t
C2-156
Fig . 7
17) Remove drive belt cover and drive belts.
(Refer to 1-5 "Drive Belts [01A0]")
18) Disconnect alternator B terminal and connector.
19) Remove bolt securing the alternator harness cover .
20) Remove alternator .
21) Remove A/C belt idler pulley ASSY.
22) Remove all bolts securing the A/C compressor
bracket. Move the A/C compressor and bracket forward
as a unit to facilitate removal of intake manifold mount-
ing bolts .
When moving the compressor and bracket, take care
not to over-stretch the pipes and hoses.
Fig. 9
B: INSTALLATION
Fig . 10
Installation is in the reverse order of removal procedure .
Observe the following .
1) Remove traces of gasket from the mating surfaces of
the intake manifold and cylinder head before installa-
tion .
2) Be sure to use new gaskets.
3) Be careful not to catch hoses or harnesses between
intake manifold and cylinder head .
4) Before installing A/C compressor bracket, apply fluid
packing to thread portion of bolt which indicating arrow
mark in Figure .
Fluid packing
Three bond 1344 or equivalent
6
1-1g . tr
23) Remove collector and intake manifold ASSY.