Table of Contents
Advertisement
PERIODIC MAINTENANCE SERVICES
[02CO] 1-5
C: INSPECTION
1) Remove left and right timing belt covers 1@ and
.
OD (
2
w
Cl-046
Fig . 20
2) While cranking engine at least four rotations, check
cam sprocket to determine idler alignment
timing belt back surface for cracks or damage . If a fault
ness). Replace worn timing belt .
is found replace the belt with a new one .
4) Install left and right timing belt covers 1~
3) Measure timing belt width W. If it is less than 34 mm
(1 .34 in), check idlers, tensioner, water pump pulley and
(square-
and © .
9
Advertisement
Table of Contents
Troubleshooting
