Subaru SVX 1992 Manual page 546

AUTOMATIC TRANSMISSION AND DIFFERENTIAL
[T3Col 3-2
C : SELF-DIAGNOSIS
Existing problem check pro-
cedure
Move selector lever to "D"
and turn manual switch ON .
Turn ignition switch ON .
Move selector lever to "3"
and turn manual switch OFF .
Move selector lever to "2"
and turn manual switch ON .
Move selector lever to "1"
and turn manual switch OFF .
Warm up the engine .
Drive vehicle at speeds
greater than 20 km/h (12
MPH) .
Stop vehicle and turn igni-
tion switch OFF .
Turn ignition switch ON .
Check if indicator lamp
I comes on.
Yes
Turn ignition switch OFF .
Partially depress accelerator
pedal (to turn idle switch
off) .
Indicator lamp blinks at 4-Hz
intervals .*
Ensure indicator lamp blinks .
Indicator lamp blinks at 2-Hz
intervals ."
Faulty battery Normal
No
Faulty indicator lamp circuit
or TCU
I Previous problem history check procedure
Move selector lever to "1" and turn manual switch ON .
I Turn ignition switch ON .
Move selector lever to "2" and turn manual switch OFF .
Move selector lever to "3" and turn manual switch ON . I
Move selector lever to "D" and turn manual switch OFF .
I Partially depress accelerator pedal (to turn idle switch off) .
Trouble code is outputted .
Check problem correspond-
ing with trouble code.
* : Blinks every 0 .125 (1/8) seconds (with ignition switch OFF) .
** : Blinks every 0 .25 (1/4) seconds (until ignition switch is turned OFF) .
T
' r , F
ndicator lamp remains illu-
minated .
f
Check inhibitor switch, man-
ual switch, idle switch, wir-
ing, TCU, etc.
173