Subaru SVX 1992 Manual page 173

2-3 [W3A3) ENGINE
7) Remove hydraulic lash adjusters .
Arrange the hydraulic lash adjusters in order so that
they can be installed in their original positions .
C2-235
Fig . 46
3. CAMSHAFTS RH
Operation precautions are the same as those for the LH
camshafts, except the method for aligning the cam-
shaft gear match marks before removing camshafts .
1) Remove ignition coils .
2) Disconnect blow-by hose and remove cylinder head
cover and gasket .
3) Remove front camshaft cover .
4) Remove camshaft oil seal and plug .
5) Removal of intake and exhaust camshafts
(1) Rotate the intake camshaft (upper) and exhaust
camshaft (lower) so that the notch at the front end of
each camshaft faces directly upward .
®O
Face the notch
0
upward . wJ I r
I
® I ~-
O
,O
C2-236
Fig. 47
34