Subaru SVX 1992 Manual page 655

SUSPENSION [W1A81 4-1
I
B2-1421
Fig. 8
Front toe-in adjustment
1) Loosen the left and right side rod lock nuts .
2) Turn the left and right tie rods equal amounts until
the toe is within the specified range .
Both the left and right tie-rods are right-hand threaded .
To increase toe-in, turn both tie-rods counterclockwise
equal amounts (as viewed from the outside of the
vehicle) .
Pig . Y
3) Tighten tie-rod lock nut.
Tightening torque :
78 - 88 N-m (8 - 9 kg-m, 58 - 65 ft-Ib)
a. Check that left and right wheel steering angle is
within specifications .
b. Correct tie-rod boot if twisted.
Rear toe-in adjustment
1) Loosen self-locking nut on rear lateral link .
a. When loosening or tightening adjustment bolt, hold
bolt head and turn self-locking nut.
b. Replace self-locking nut with a new one .
2) Turn adjustment bolt head until toe-in and -out are
within specifications .
fig. 1 U
Movement of one scale graduation changes toe-in or
-out by approximately 2 mm (0 .08 in).
3) Tighten self-locking nut.
Tightening torque :
83 - 113 N "m (18.5 - 11 .5 kg-m, 61 - 83 ft-Ib)
Rotation direction of adjustment bolt Toe-in/-out of left wheel Toe-in/-out of right wheel
Changes for more "toe-in" Changes for more "toe-out"
Changes for more "toe-out" Changes for more "toe-in"
Fig. 11
B4-738
9