Subaru SVX 1992 Manual page 387

EXHAUST SYSTEM
4. Rear Catalytic Converter
~ A: REMOVAL
[w4BO1 2-9
7T, I
0 61
va~
T1
U
Tightening torque : N .m (kg-m, ft-Ib)
T1 :13-23(1 .3-2 .3,9-17)
C2-131
Fig. 8
1) Remove rear catalytic converter protector.
2) Disconnect rear catalytic converter from front ex-
haust pipes.
3) Disconnect rear catalytic converter from rear ex-
haust pipe .
4) Remove rear catalytic converter.
B : INSTALLATION
Installation is in the reverse order of removal proce-
dures.
Observe the following :
1) Be sure to install a new gasket .
2) Use only nuts specified by the manufacturer .
Be sure to install bolts, springs and self-locking nuts in
the order indicated in the figure.
Always install new self-locking nuts .
Fig. 9
7