Subaru SVX 1992 Manual page 663

SUSPENSION (W4D01 4-1
D : ASSEMBLY
1) Compress the coil spring .
2) Install lower rubber seat to the spring seat .
3) Set the coil spring correctly so that its end face fits
well into the spring seat as shown.
- End face
C4-461
Fig. 31
4) Install helper and dust cover to the piston rod.
Ensure helper and dust cover are aligned with graded
section of piston rod as shown in Figure 32.
Upper spring seat
Align helper and dust
Dust cover
cover with graded portion
~'
Helper
of piston rod .
>
Rod
C4-5981
Fig. 32
5) Pull the piston rod fully upward, and install rubber
seat and spring seat.
Ensure that upper spring seat is positioned with
"OUT" mark facing outward .
I
It
C4-4-59
Fig. 33
6) Install strut mount to the piston rod, and tighten the
self-lock nut temporarily .
Be sure to use a new self-lock nut.
7) Loosen the coil spring carefully .
8) While fixing the spring seat, tighten the self-lock nut
with SOCKET (20099PA000) .
17