Subaru SVX 1992 Manual page 696

4-2 [W1AOI WHEELS AND AXLES
Fig. 13
8) After scribing an alignment mark on camber adjust-
ing bolt head, remove nuts which connect housing and
4) Depress brake pedal to stop drive shaft rotation . strut .
Remove axle nut with socket wrench . Do not remove upper bolt.
Be sure to loose and retighten axle nut after removing
wheel from vehicle. Failure to follow this rule may
damage wheel bearings.
5) Remove bolts which secure ball joint to housing .
C4-101
Fig. 14
1W
M
diner ASSY
0"
iSx
wrench
C4-133
. .y .
.
Fig. 18
12
71 Disconnect brake hose claMD from strut .
1) Lift up and remove front wheels .
2) Remove hubcaps .
31 Unlock axle nut .
1'& . . .
9) Disconnect brake caliper ASSY from housing .
61 Disconnect ABS sensor from housina .