Subaru SVX 1992 Manual page 702

4-2 [W2AO] WHEELS AND AXLES
8) Disconnect ABS harness clamp from strut.
© T wrench
/ ~ l // 11\ 11
ABS sensor clamp
7q ~`~ YI-X .C 'fl~\`11~1'
C4-112
Fig . 40
9) Disconnect brake hose clamp from strut .
T wrench
Brake
1
hose'
C4-113
Fig. 41
10) Place alignment marks on stabilizer lever and stabi-
lizer and remove stabilizer lever.
Stabilizer lever
Marking
Lower arm
C4-109
Fig . 42
11) Loosen stabilizer clamp.
Step 11) is performed only when right drive shaft is
removed .
Fig. 45
18
Fig. 43
12) Disconnect lower arm from housing .
Fig. 44
13) Protect ball joint using cloth to prevent damage.