Table of Contents
Advertisement
STEERING SYSTEM
[w6AO] 4-3
11) Place pump in a vise, and remove bolts from upper
surface of tank .
a. Use soft jaws and lightly tighten vise jaws.
b. After bolts are loose enough to be rotated with
your hand, press pump against tank while removing
bolts . Failure to do so causes fluid to spill out. Remove
tank as quickly as possible, and wipe clean fluid spilled
on parts . Except when only tank is to be checked,
remove tank and pump as a unit and separate from
each other on a work bench. This prevents fluid from
spilling on the engine.
59
Advertisement
Table of Contents
Troubleshooting
