Table of Contents
Advertisement
3- 2 [wsAol
AUTOMATIC TRANSMISSION AND DIFFERENTIAL
8. Drive Pinion Shaft
A: DISASSEMBLY
1 ) Straighten the staked portion of the lock nut, and
remove the lock nut while locking the rear spline portion
of the shaft . Then pull off the drive pinion collar .
Remove the O-ring
Drive pinion
collar
rig. 243
WRENCH (499787100)
HOLDER (498937100)
133-3761
Fig. 241
2) Using a press, separate the rear roller bearing and
outer race from the shaft .
Fig. 242
3) Using a press, separate the front roller bearing from
the shaft .
B: INSPECTION
Make sure that all component parts are free of harmful
cuts, gouges, and other faults .
C: ASSEMBLY
1 ) Measure dimension "A" of the drive pinion shaft.
r-1g. Z44
2) Using a press, force-fit the roller bearing in position .
Do not change the relative positions of the outer race
and bearing cone.
156
Advertisement
Table of Contents
Troubleshooting
