Subaru SVX 1992 Manual page 198

ENGINE
Iw5B1) 2-3
4) Rotate crankshaft to bring #3 and #4 piston to BDC
position, then remove piston circlip through service
hole of #1 and #2 cylinders with PISTON CIRCLIP
PLIERS .
Fig. 112
5) Draw out piston pin from #3 and #4 pistons through
service hole of #1 and #2 cylinders .
6) Rotate crankshaft to bring #5 and #6 pistons BDC
position, then remove piston circlip through service
hole of #5 and #6 cylinders .
7) Draw out piston pin from #5 and #6 pistons .
8) Remove bolts which connect cylinder block on the
side of #1, #3 and #5 cylinders .
9) Back off bolts which connect cylinder block on the
side of #2, #4 and #6 cylinders two or three turns .
59