WHEELS AND AXLES
IW2AOI 4-2
11) Install disc cover to housing the three bolts
t-1g . J6
12) Attach hub COMPL to HUB STAND (28099PA080)
securely .
13) Clean dust or foreign particles from the polished
surface of hub .
14) Using HUB INSTALLER "FRONT" (28099PA020),
press bearing into hub by driving inner race .
HUB INSTALLER "FRONT"
(28099 PA020)
a
O
o
I
HUB STAND
(28099 PA080)
C4-333
Fig. 37
2. Front Drive Shaft
A: REMOVAL AND INSTALLATION
1) Move select lever to Neutral .
2) Release parking brake lever .
3) Lift up vehicle and remove front wheel .
4) Remove hubcap.
5) Unlock axle nut .
rig . su
6) Depress brake pedal to stop drive shaft rotation .
Remove axle nut with socket wrench .
Be sure to loose and retighten axle nut after removing
wheel from vehicle. Failure to follow this rule may
damage wheel bearings.
7) Remove stabilizer link.
Fig. 39
17