Table of Contents
Advertisement
3- 2 Inn10A01
AUTOMATIC TRANSMISSION AND DIFFERENTIAL
1 0 . Low & Reverse Brake
The piston, dish plate, drive plate, driven plate, retaining
plate and snap ring are mounted directly to the trans-
mission case. The spring retainer which is integral with
F
A- CONSTRUCTION
the spring is secured to the inner race of the transmis-
sion case engagement surface .
Snap ring
Retaining plate
Transmission case
Lip seal
--
Dish plate
-Piston
Bolt
Lathe cut seal ring
Clutch spring retainer
`-Forward clutch drum
Driven plate
Drive plate
C3-009
Fig . 19
F B: FUNCTION
During 1st speed of the "1st range", and reverse,
hydraulic pressure from the hydraulic pressure control-
ler is applied to the low £r reverse piston . This pressure
causes the drive plate and driven plate to engage, and
the forward clutch to be fixed.
14
Advertisement
Table of Contents
Troubleshooting
