Subaru SVX 1992 Manual page 787

STEERING SYSTEM [w5AO] 4-3
5. Oil Cooler and Hose & Pipe
ASSY (Power Steering System)
~A: REMOVAL
1) Disconnect battery earth terminal .
2) Drain approximately 0 .3 liters (0 .3 US qt, 0 .3 Imp qt)
of fluid from oil tank. (Ref. to [4-3] No . MAO .)
3) Remove belt cover.
4) Remove radiator bracket .
5) Disconnect radiator fan connector .
6) Remove main and sub radiator fans.
7) Separate canister from bracket and leave as it is .
8) Raise vehicle .
9) Remove under cover .
10) Remove bolts securing oil cooler with condenser
from both sides .
11) Slightly lift and move radiator ASSY and draw out
oil cooler .
04-278
Fig. 139
Fig . 140
12) Disconnect hoses A and B at points indicated in the
figure below and remove oil cooler .
Fig. 141
a. Do not allow fluid from the hose end to come into
contact with pulley belt.
b. To prevent foreign matter from entering the hose
and pipe, cover the open ends with a clean cloth. (For
removal of hose and pipe, refer to the component parts
figure.)
57