Interfaces And System Functions - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

4.2

Interfaces and system functions

Availability of the interfaces
The following table shows the availability of the physical and logical interfaces. Note that in
this table all interfaces are listed. Depending on the system function, some interfaces are not
available. On the WBM pages you can only select the available interfaces.
We reserve the right to make technical changes.
Wireless interface
(WLAN)
IP interface:
LAN interface
VLAN
VAP interface
WDS interface
VLAN
only in access point mode
1)
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
Client device
W748-1 M12
W748-1 RJ-45
WLAN 1
P1
ManagementVLAN
-
1)
_
1)
24
4.2 Interfaces and system functions
Access points
W786-1 RJ-45
W788-1 M12
W788-1 RJ-45
WLAN 1
P1
ManagementVLAN
VAP 1.Y
Y = 1 ... 8
WDS 1.Y
Y = 1 ... 8
24
Technical basics
Access points
W786-2 RJ-45
W786-2IA RJ-45
W786-2 SFP
W788-2 M12
W788-2 M12 EEC
W788-1 RJ-45
W788-2 RJ-45
WLAN 1 (in
•
client mode
only one
WLAN inter-
face is availa-
ble)
WLAN 2
•
P1
Manage-
mentVLAN
VAP X.Y
X = 1 ... 2
Y = 1 ... 8
WDS X.Y
X = 1 ... 2
Y = 1 ... 8
24
49