5.8
Diagnostics
You can open the diagnostics Web page by selecting the diagnostics icon from either the
home page or the navigation sidebar. This page includes the following subpages:
• Faults/alarms
• I/O status
• Status bits
• DIP switch status (G115D converters only)
Switching among subpages
You have two methods to switch among the subpages:
• Click the circle icon at the bottom
• Hold down the left mouse button and move the pointer left or right over the page header
or footer until a different subpage appears
Meaning of fault/alarm icons
Fault and alarm icons are shown in the upper-right corner of the SINAMICS G120 Web page.
See the following example for possible icon display:
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004
Fault icons
①
No active faults
②
Active faults (in this example: one active fault)
Alarm icons
③
No active alarms
④
Active alarms (in this example: two active alarms)
Standard Web pages
5.8 Diagnostics
83