Delete; Remote-Ssid - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Example
The following example creates and then displays the details of a WLAN service configuration named
test-wlan in WDS mode with an SSID of "test":
WLC.siemens.com
WLC.siemens.com
Service type: wds
Pre-shared Key:
Name: test-wlan
Enable status: enable
Pre-shared Key:
SSID: test
delete
Use the
command to delete a WLAN service configuration. The
delete
from the wlans context of the CLI.
delete WLANS-name
Parameters
WLANS-name
Example
The following example deletes the WLAN service named test-wlan:
WLC.siemens.com
remote-ssid
Use the
remote-ssid
mobility domain.
remote-ssid
Parameters
None.
Usage
The
remote-ssid
enable. For more information, see
SCALANCE WLC711 CLI Reference Guide
:wlans# create test-wlan mode wds ssid test
:wlans# show test-wlan
Specifies the name of the WLAN service to delete
:wlans# delete test-wlan
command to display the available remote SSIDs within the Wireless Appliance's
command reports the remote SSIDs only if the
remoteable
delete
remoteable
on page 331.
wlans Commands
delete
command is accessible
command is set to
280
Advertisement
Table of Contents
