Configuring Threshold Values For Local Fault Events On An Interface - Juniper EX9200 Features Manual

Configuring Threshold Values for Local Fault Events on an Interface

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
You can configure threshold values on an interface for the local errors that trigger the
sending of link event TLVs.
To set the error threshold values for sending event TLVs, include the
frame-period , frame-period-summary
oam ethernet link-fault-management interface interface-name event-thresholds]
level:
[edit protocol oam ethernet link-fault-management interface interface-name]
event-thresholds {
frame-error count;
frame-period count;
frame-period-summary
symbol-period count;
}
event-thresholds on page 52
frame-error on page 54
frame-period on page 55
frame-period-summary on page 56
symbol-period on page 66
IEEE 802.3ah OAM Link-Fault Management Overview on page 3
Configuring IEEE 802.3ah OAM Link-Fault Management on page 5
Enabling IEEE 802.3ah OAM Support on page 6
Configuring Link Discovery on page 16
Configuring the OAM PDU Interval on page 6
Configuring the OAM PDU Threshold on page 7
Disabling the Sending of Link Event TLVs on page 18
Detecting Remote Faults on page 18
Configuring an OAM Action Profile on page 8
Specifying the Actions to Be Taken for Link-Fault Management Events on page 19
Monitoring the Loss of Link Adjacency on page 12
Monitoring Protocol Status on page 13
Configuring Threshold Values for Fault Events in an Action Profile on page 10
Applying an Action Profile on page 10
Setting a Remote Interface into Loopback Mode on page 11
Enabling Remote Loopback Support on the Local Interface on page 15
Chapter 1: Configuring Ethernet OAM Link Fault Management
, and symbol-period
count;
,
frame-error
statements at the [edit protocols
hierarchy
17