Omron CS1W-MCH71 Operation Manual page 167

System Variables
Variable IORD Group
Address Address
SW01B0 30D8 Tracing
(Unit
Ver. 3.0
and
later)
SW01B1
SW01B2 30D9
SW01B3
SW01B4 30DA
SW01B5
SW01B6 30DB
SW01B7
SW01B8 30DC
SW01B9
SW01BA 30DD
SW01BB
SW01BC 30DE
SW01BD
SW01BE 30DF
SW01BF
SW01C0 30E0
SW01C1
SW01C2 30E1
SW01C3
SW01C4 30E2
SW01C5
SW01C6 30E3
SW01C7
SW01C8 30E4
SW01C9
SW01CA 30E5
SW01CB
SW01CC 30E6
SW01CD
122
Name
Trace status 1: Number Outputs the number of data trace points
of trace points set for the trace status.
0 or 128 to 32768
0: Default value or when 0 is set by the
Support Tool
Trace status 1: Execu- Outputs the execution status of the
tion status trace operation.
0: Tracing stopped
1: Tracing being executed
Trace status 1: Error Outputs error information while tracing
information is being executed.
0: Normal
1: Trace condition setting error
The trace condition setting is incor-
rect.
Trace status 1: Trigger Outputs whether or not the trigger con-
status dition has been satisfied.
0: Trigger condition not satisfied
1: Trigger condition satisfied
Trace status 1: Sam- Outputs the number of times data has
pling counter been sampled after tracing starts.
Trace status 1: Data Outputs the number of times data has
sampling counter been sampled after tracing starts. Delay
time is not included.
Trace status 2: Number Same as for trace status 1.
of trace points
Trace status 2: Execu- Same as for trace status 1.
tion status
Trace status 2: Error Same as for trace status 1.
information
Trace status 2: Trigger Same as for trace status 1.
status
Trace status 2: Sam- Same as for trace status 1.
pling counter
Trace status 2: Data Same as for trace status 1.
sampling counter
Reserved Reserved
Reserved Reserved
Reserved Reserved
Reserved Reserved
Reserved Reserved
Reserved Reserved
Reserved Reserved
Reserved Reserved
Reserved Reserved
Description
Point
Nil
Nil
Nil
Times
Times
Same as for
trace status
1.
Same as for
trace status
1.
Same as for
trace status
1.
Same as for
trace status
1.
Same as for
trace status
1.
Same as for
trace status
1.
Section 4-5
Unit Update timing
When power is
turned ON or
when trace condi-
tion setting is
received
Unit scan
When the trace
start is received
Unit scan (during
trace execution)
Unit scan (during
trace execution)
Unit scan (during
trace execution)
Same as for trace
status 1.
Same as for trace
status 1.
Same as for trace
status 1.
Same as for trace
status 1.
Same as for trace
status 1.
Same as for trace
status 1.