•
Hatch Lock Cylinder Replacement
NOTE: Put on gloves to protect your hands.
1. Remove these items:
Hatch lower trim panel (see page 20-53).
Rear license trim (see page 20-98).
2. Disconnect the cylinder rod (A).
3. From outside the hatch, remove the bolt securing
the lock cylinder (A). From inside the hatch, pull the
lock cylinder out by releasing the hook (B).
Fastener Location
~:
Bolt, 1
6x1.0mm
9.8N·m
11.0 kgf.m, 7.2Ibf.ftl
4. Install the lock cylinder in the reverse order of
removal, and note these items:
• Make sure the rod is connected properly.
• Make sure the hatch opens properly and locks
securely.
20-111