Advertisement
dot1x system-auth-control
The dot1x system-auth-control Global Configuration mode command enables 802.1x globally. Use
the no form of this command to disable 802.1x globally.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
dot1x is disabled.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1x
console(config)# dot1x system-auth-control
dot1x port-control
The dot1x port-control Interface Configuration mode command enables manual control of the
authorization state of the port. Use the no form of this command to return to the default setting.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
•
auto — Enable 802.1X authentication on the interface and cause the port to transition to
the authorized or unauthorized state based on the 802.1X authentication exchange
between the port and the client.
•
force-authorized — Disable 802.1X authentication on the interface and cause the port to
transition to the authorized state without any authentication exchange required. The
port resends and receives normal traffic without 802.1X-based authentication of the
client.
•
force-unauthorized — Deny all access through this interface by forcing the port to
transition to the unauthorized state, ignoring all attempts by the client to authenticate.
The Ethernet Switch Module cannot provide authentication services to the client
through the interface.
342
802.1x Commands
globally.
Advertisement
