Terminating The Connection To The Remote Sftp Server; Sftp Configuration Example - H3C S5500-EI series Operation Manual

Operation Manual – SSH
H3C S5500-EI Series Ethernet Switches
Establish a connection to
the remote SFTP server
and enter SFTP client
view
Display a list of all
commands or the help
information of an SFTP
client command

2.3.6 Terminating the Connection to the Remote SFTP Server

Follow these steps to terminate the connection to the remote SFTP server:
To do...
Establish a
connection to the
remote SFTP server
and enter SFTP
client view
Terminate the
connection to the
remote SFTP server
and return to user
view

2.4 SFTP Configuration Example

I. Network requirements
As shown in
Switch B. Switch A, an SFTP client, uses the username client001 and password
aabbcc to login to Switch B for file management and file transfer.
To do...
sftp [ ipv6 ] server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { aes128 | des }
| prefer-ctos-hmac { md5 | md5-96
| sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher
{ aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ]
*
help [ all | command-name ]
Use the command...
sftp [ ipv6 ] server
[ port-number ] [ identity-key
{ dsa | rsa } | prefer-ctos-cipher
{ aes128 | des } |
prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange
| dh-group1 | dh-group14 } |
prefer-stoc-cipher { aes128 |
des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
bye
exit
quit
Figure 2-1, an SSH connection is established between Switch A and
Use the command...
2-6
Chapter 2 SFTP Service
Remarks
Required
Execute the
command in
user view.
Required
Remarks
Required
Execute the command
in user view.
Required.
Use any of the
commands.
These three commands
function in the same
way.