Toyota T100 1996 Service Manual page 431

5 Check voltage between terminals VCC and E2 of ECM.
ON
VCC (+)
For M/T
E2 (−)
For A/T
BE6653
P23813
P24316
OK
Check for open in harness and connector
between ECM and sensor (VCC line)
(See page IN−26).
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS
PREPARATION:
(a)
E2 (−)
(b)
CHECK:
Measure voltage between terminals VCC and E2 of ECM con-
nector.
OK:
VCC (+)
A00108
− ENGINE (5VZ−FE)
Remove the right cowl side trim (See page SF−61).
Turn the ignition switch ON.
Voltage: 4.5 − 5.5 V
NG Check and replace ECM (See page IN−26).
DI−167